Thyristor

ANALOG THYRISTOR POWER CONTROLLERS HI-8003 -TP-C3-ED

Features

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 3 PHASE 415VAC with Neutral , 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:100KW)
MAXIMUM LOAD CURRENT : 300A
CONTROLLING INPUT : 4-20mA(0-10VDC)
TYPE OF CONNECTION : STAR/DELTA
blg-dtl-img1.jpg

DIGITAL POWER CONTROLLERS – HI-8003-DP-C3

Features

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

DESCRIPTION

SYSTEM INPUT : 3 PHASE 415VAC , 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement
MAXIMUM LOAD CURRENT : 150 Amps
CONTROLLING INPUT : 4-20mA/0-10VDC
TYPE OF CONNECTION : STAR/DELTA
blg-dtl-img1.jpg

DIGITAL POWER REGULATOR – 2-PHASE, HI-8003 M

Features:

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 2 PHASE 440VAC ±10% 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:30KW)
MAXIMUM LOAD CURRENT : 50A
CONTROLLING INPUT : 4-20mA(or0-10VDC)
blg-dtl-img1.jpg

HI-8003A40 – ANALOG THYRISTOR POWER CONTROLLER

Features:

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 1 PHASE 230VAC ±10% 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:5KW)
MAXIMUM LOAD CURRENT : 40A
CONTROLLING INPUT : 4-20mA( 0-10VDC)
blg-dtl-img1.jpg

THYRISTOR BASED DIGITAL POWER CONTROLLER – HI-8003 M

Features:

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 1 PHASE 230VAC ±10% 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:5KW)
MAXIMUM LOAD CURRENT : 40A
CONTROLLING INPUT : 4-20mA(or0-10VDC)
blg-dtl-img1.jpg

© 2020 Heatcon Sensors (P) Ltd..| All Rights Reserved.